I haven't seen a negative comment about them anywhere. I have requested a quote for a Model 30 including shipping but I imagine it's going to end up around $2200. I could save about $500 and go with TP Tools Scat Blast which also seem pretty good but there smallest cabinet is 34". I'm a buy once guy.
Premium Member Content
This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.
My cabinets were 48X60 pressure cabinets. One shot plastic media and walnut shell, the other shot flower size glass bead. Trick to having a cabinet for any kind of production is air pressure volumn, not the high pressure. I had a 800cfm compressor that ran the shop booths and the two cabinets. So all four guys could be working a the same time. A pressure cabinet will out produce a siphon cabinet about 4 to one in time on a job. But for a small use system, a siphon using higher pressure and a course media will work fine. The dust collectors are OK and normally will collect all the air born dust, where a pressure production system will really capture all the dust, but the costs really go up. Find a good used pressure cabinet and have a blast...
- Solution
I would have preferred a pressure system but I'm not willing to upgrade my compressor to have one. Right now my 24 CFM at 175 PSI is fine for a syphon system. I'll be ordering the Trinco Model 30 today and I'm sure it will be great for what I'll be using it for. I'll purchase a separate reclaimer to keep the dust down.
-
Have you checked out Joe's Latest Blog?
-
By Joe Marconi in Joe's BlogI recently spoke with a friend of mine who owns a large general repair shop in the Midwest. His father founded the business in 1975. He was telling me that although he’s busy, he’s also very frustrated. When I probed him more about his frustrations, he said that it’s hard to find qualified technicians. My friend employs four technicians and is looking to hire two more. I then asked him, “How long does a technician last working for you.” He looked puzzled and replied, “I never really thought about that, but I can tell that except for one tech, most technicians don’t last working for me longer than a few years.”
Judging from personal experience as a shop owner and from what I know about the auto repair industry, I can tell you that other than a few exceptions, the turnover rate for technicians in our industry is too high. This makes me think, do we have a technician shortage or a retention problem? Have we done the best we can over the decades to provide great pay plans, benefits packages, great work environments, and the right culture to ensure that the techs we have stay with us?
Finding and hiring qualified automotive technicians is not a new phenomenon. This problem has been around for as long as I can remember. While we do need to attract people to our industry and provide the necessary training and mentorship, we also need to focus on retention. Having a revolving door and needing to hire techs every few years or so costs your company money. Big money! And that revolving door may be a sign of an even bigger issue: poor leadership, and poor employee management skills.
Here’s one more thing to consider, for the most part, technicians don’t leave one job to start a new career, they leave one shop as a technician to become a technician at another shop. The reasons why they leave can be debated, but there is one fact that we cannot deny, people don’t quit the company they work for, they usually leave because of the boss or manager they work for.
Put yourselves in the shoes of your employees. Do you have a workplace that communicates, “We appreciate you and want you to stay!”
-
-
Similar Topics
-
By Joe Marconi
Premium Member Content
This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.
-
By Joe Marconi
Premium Member Content
This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.
-
By Joe Marconi
Premium Member Content
This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.
-
By carmcapriotto
Matt Fanslow explores the complexities of electricity in automotive diagnostics. He breaks down fundamental concepts of volts, amps, resistance, and Ohm's law, using practical examples to clarify their roles in vehicle electrical systems.
Show Notes
Challenges of Explaining Electricity (00:01:15) Fundamental Aspects of Electricity (00:02:42) NAPA Auto Tech Training (00:18:20) Understanding Voltmeter Readings (00:19:21) Ground Reference and Voltage Drop (00:20:29) Effect of Resistance on Voltage (00:22:44) Series Circuit and Voltage Split (00:29:17) Verification of Electrical Issues (00:32:29) Fuse Block and Voltage Verification (00:34:44)
Voltage Drop Testing (00:34:55)
Thanks to our Partner, NAPA Autotech napaautotech.com
Email Matt: [email protected]
Diagnosing the Aftermarket A - Z YouTube Channel HERE
Aftermarket Radio Network: https://aftermarketradionetwork.com/
Click to go to the Podcast on Remarkable Results Radio
-
By carmcapriotto
Mike Ragsdale is the founder of the 30a Company, and he has an incredible story of being called out by his kids when they got tired of hearing him talk about his dream life without ever pursuing it. This is an incredibly inspiring episode that may result in you exploring how you can create a life you don’t need to escape from.
Thank you to RepairPal for sponsoring The Auto Repair Marketing Podcast. Learn more about RepairPal at https://repairpal.com/shops
How To Get In Touch
Group - Auto Repair Marketing Mastermind
Website - shopmarketingpros.com
Facebook - facebook.com/shopmarketingpros
Get the Book - shopmarketingpros.com/book
Instagram - @shopmarketingpros
Questions/Ideas - [email protected]
Click to go to the Podcast on Remarkable Results Radio
-
-
-
Our Sponsors
Recommended Posts
NATURE
That's too cheap:) I'm not looking for something that has to be heavily modified to become mediocre. Because it will only be used for small items, I'm looking for something less than 32" wide to save some space as most commercial units also have some sort of dust collection that will need to be accounted for in the footprint. As of right now the Trinco Model 24 is in the lead unless someone changes my mind.
Link to comment
Share on other sites
Transmission Repair
Premium Member Content
This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.
Link to comment
Share on other sites